Firmware upgrade with PC

The PC upgrade tool is used as follows:

1.First, confirm whether the handle is F version (you can see that the label on the back of the handle has the word "MOCUTE xxF")

2.Download the PC upgrade kit first. After downloading to the computer and unzipping: Install MCT_DRIVE.EXE driveon PC first.

3.When the handle is turned off: press and hold the button first [direction key: up]

4.Plug in the USB data cable (it cannot be a charging cable with charging function only, and some models have a distribution data cable), and the handle will not start up in this mode.

5.Double click on the computer to open MOCUTE-060F_xxx.exe Click the [SEARCH] button, and the following figure on the right will be displayed after the USB connection is successful, and the current firmware version date will be displayed.

6.Click [DOWNLOAD], and the upgrade is successful, as shown in the figure below.

After the upgrade is successful, you need tocalibrate the joystick: press [B+Y+Power key] Turn on the machine, turn the maximum straight outer diameter of all joystick rods for two turns, and then release them, and then long press the power key to turn off the gamepad.